This page contains links to several Lua script "extensions" for Win-Test.

See the Readme file inside each Zip file for instructions and detailed documentation.

Note:  Some scripts require the latest wt_dev 4.16.0 or later to work properly.

    * AltDScripts3 - Developed for K0DQ, K5GA -- add TRlog style Alt-D dupe check on secondary
      radio, use spacebar to call (not compatible with radio DVR scripts below)

    * CtrlPlus - A script to use in a CW or RTTY message instead of $CR.  It silently logs a
      QSO *after* the message is sent.  Useful especially in the NA Sprint and other CW sprints.

    * ExchangeBoxSS - Provides a pop-up data entry box for entering the complex ARRL Sweepstakes 
      exchange in free-form, similar to TRlog and N1MM Logger.

    * FT1000scripts - ClearRIT, SwapVFO, VFOAtoB only, for FT-1000D, FT-1000MP, FT-990

    * FT2000scripts - ClearRIT, RIT up/down, SwapVFO, VFOAtoB, Play voice keyer messages,
      select VFO A or B for TX.  Supports both FT-2000 and FT-5000.

    * IcomScripts - (new) Use Icom USB sound card as Win-Test Voice Keyer, ClearRIT, RIT up/down,
      SwapVFO, VFOAtoB, Dual Watch, control waterfall display span from Win-Test, keep internal
      internal CW keyer paddle speed in sync with Win-Test (-1 or - 2 WPM), swap dot/dash paddles.
      For Icom IC-7000, IC-7100, IC-7200, IC-7410, IC-7600, IC-7700, IC-7800, IC-7850, IC-7851, and
      IC-9100.  IC-Generic and OmniRig also supported.  Not all functions available on all radios.
      IC-7800 v3.00, IC-7700 v2.00, IC-7600 v2.00 firmware required for DVK and scope functions.
      Uses new Icom commands to generate CW from text if no keying circuit or WinKey available.

    * K3scripts - ClearRIT, SwapVFO, RIT up/down, VFO up/down, Play DVR voice messages,
      keep internal CW keyer paddle speed in sync with Win-Test (-1 or -2 WPM), for
      Elecraft K3.

    * KX3scripts - ClearRIT, SwapVFO, RIT up/down, VFO up/down, generate CW or RTTY messages using
      radio's internal keyer for all functions, no keying circuit required, for Elecraft KX3.

    * MatchCwSpeed (tnx W3LPL) - Automatically sets the Win-Test keyer speed to match the
      speed of a spotted station, if the speed is being reported by the CW Skimmers in the Reverse Beacon
      Network (RBN).  Works when you press Ctrl-Up/Down to select spots from the band map.  Optionally
      sets the speed of the keyer built into the Elecraft K3 to the same value (+/- optional speed delta).

    * N6TVESM - An updated version of the default Win-Test ESM (Enter Sends Message) script that 
      makes ESM mode more usable in CQ WW Phone or WPX Phone, where you want to speak the exchange
      rather than send it, when in RUN mode.  Use this with K3scripts, FT2000scripts etc. when
      using ESM with the radio's DVR.

    * PlayAltCMsgs - Provides a way to invoke up to 12 of the "Additional" (Alt-C) CW/RTTY messages
      with a single keystroke.  These messages are saved in WT.INI, so they don't change from log to log. 

    * PlayDVK8and9 - Developed for ES5TV -- Play MK2R+ DVK messages 8 and 9 (or any others 1-7)

    * P3scripts - Resets the Elecraft P3 panadapter display range to the requested span based on
      the active radio's current frequency.  Avoids displaying "out of band" frequencies and
      makes it unnecessary to touch the P3 "Span" and "Center" controls.
    
    * SecondaryRadioPrevNext (tnx I4UFH) -- Moves secondary radio to spots in the
      secondary radio window's band map, similar to how Ctrl-Up/Down and Ctrl-Space work
      with the primary radio.

    * SSPrefillData (tnx NR5M) - Automatically pre-fills ARRL Sweepstakes exchange data from
      a "pre-fill" file when you type a call and press the [tab] key.  Uses a user-supplied "Extra data"
      (.xdt) file stored in the Win-Test /extras directory.

    * StackCalls - Enter multiple callsign at once and stack them in the Partner window
      (for single-ops with big pileups, or multi-ops with Partner stations)
 
    * SwapFocus - FOCUS1 and FOCUS2 scripts that may be used within the advanced SO2R scenarios
      to automatically change the data entry focus between the Radio1 and Radio2 windows.

    * TS590scripts - ClearRIT, SwapVFO, RIT up/down, VFO up/down, Play DVR voice messages,
      keep internal CW keyer paddle speed in sync with Win-Test (-1 or -2 WPM), Play CW messages
      using radio's internal keyer for all CW functions, no keying circuit required, for 
      Kenwood TS-590S, TS-590SG, TS-990S, and TS-2000.

    * UpdateCtySCP - Batch file (not a LUA script) that fetches the latest MASTER.SCP, MASTER.DTA
      CTY.DAT, CTY_WT.DAT, CTY_WT_MOD.DAT and CALLSIGN.PAT files from the web and saves them
      in the proper directory.

73,
Bob, N6TV
2 August 2015 06:31 UTC
http://www.qrz.com/db/n6tv